top of page


Public·3 members

Burn Ccd Sub Img Files

Also am wondering the same thing. I have a folder with 3 files .ccd, .img, .sub. When I burn just the image file, it doesn't allow me to boot the CD. Any ideas on how to overcome this. I would like to stick with using Toast or DiskUtility; however, if needs be, I would be willing to buy another program to do this.

Burn ccd sub img files

I have a folder with three files: ccd, img and sub. I am going to burn them with imgburn, but I can't.It writes in cd only the ccd file.I run it, and I choose.the choice: "Write image file to disc".In source - please select a file I go to the folder and I can see only ccd and img, not sub file. I choose ccd. And write speed 1x. And imgburn is burnung the cd. I choose eject tray and I am waiting.When complete reaches 100% (and buffer and device buffer 0%) then it shows All attempts to automatically close the drive tray have failesd... and it ejects cd...So I insert it again and I press ok. It begin again to burn. And when it finishes, it says that completed.So, it has not burned all the files but just the files of ccd.It is a navi program for a car. The cd rom of it does not read the cd. Any help? Thank you.

A CloneCD Control File is a text descriptor with the extension .ccd used by CloneCD to mark the properties of a CD/DVD image. These files need to be combined with an image file (usually with .img extension) to be burned. It may also come with a subchannel file (usually .sub).[1][2]

You can create a burn folder to collect files you want to burn to a CD or DVD. Burn folders are useful for burning several copies of a folder or for regularly backing up a set of files by burning them to discs.

whats the size of the .sub? if its under 2meg open it up in notepad. Most of the time, subtitle files are either str or sub files, but i have also found some sub files to contain burning rules as the same way a .dvd file does.

While CloneCD will only show the .ccd file in the 'burn image file' dialog box, all that the .ccd file contains is information on the image type, clone CD image making version, etc. The .img file is the actual disk image. The .sub file is the subchannel information - that's harder to explain. Usually, though, CloneCD will also produce a .cue file, though I'm not sure if it requires it or not in order to burn the image.

Before we begin, weneed to acknowledge the obvious: burning discs is frowned upon by the industryas it almost always involves some level of piracy. Legally, one is onlypermitted to make copies of titles they already own. That said, with theSaturn, or any retro platform that is no longer officially supported there isno way to simply buy games in such a manner that the profits make their wayback to SEGA. Especially with the Saturn, there is no Virtual Console or PSNStore, etc. where one can buy digitally and download to play on their favoritemodern device. Gamers intent on having a more rounded Saturn experience mustresort to alternate methods of playing the games.

ImgBurn does have some limited CCD compatibility (it can handle a CCD image if there is no reference to the sub-channel data at all), but in our experience it is likely users will produce occasional bad burns, and that means your CD-R has become a handy coaster, or Frisbee. For this reason, we will keep recommending CloneCD.

Test the burnt gameusing the emulator you might have used in step 7 above. If the emulator playsit, you have made a burn that should work with a real Saturn using a modboard/mod chip, provided you used good media and have a solid working laser inyour Saturn.

1. Have yousuccessfully burnt discs, and then played those same burnt discs with yourcurrent setup (computer, operating system, burner, media, burning program,burning speed, Saturn, backup boot method) in the past?

Hi, awesome guide. Until I read this I was fumbling around with bad dumps and even my Blu Ray burner could barely write a good copy. I switched to an older external Sony CD/DVD unit and stopped wasting CD-Rs!Thank you!

Now do not think that you can simply go out and buy a CD and then create a image of it for your friends to download and write to a CD. Most commercial CDs these days have a copy protection on them that makes it difficult or next to impossible to duplicate. There are, though, certain CDs that you are allowed to freely distribute to friends. For example, almost all Linux distributions are available by download as a type cd image known as an ISO. These ISOs tend to be bootable CDs that contain an image of the original master CD for the operating system. Once you download the ISO image you can then burn that image onto a blank CD and boot your computer from it. Whether you download a Linux operating system that you can run directly off the CD or use it to install the operating system onto your computer is up to you.

In modern versions of Windows, including Windows 7 and Windows 10, Microsoft includes a free program called Windows Disc Image Burner that you can use to burn ISO or IMG disc images onto a CD or DVD. To start the Windows Disc Image Burner, you need to right-click on an ISO or IMG file and then select Burn disc image as shown in the image below.

Select the drive that corresponds to your DVD writer and make sure there a blank DVD or CD inserted into the drive. Once you are ready to start burning the selected ISO image, click on the Burn button. Windows Disc Image Burner will now begin to burn the ISO image on to the selected media.

If you using Windows XP, or would rather have a full featured DVD/CD burning program, then you can CDBurnerXP. This is a free program that works on all versions of Windows and is a full featured DVD & CD writing utility. To install CDBurnerXP, go to their homepage and click on their download link.

Click on the Browse button to open a window where you can navigate to the ISO file you to wish burn. When you have selected the file, click on the Open button. You will now be at the same screen, but now the ISO you wish to burn will be selected.

Make sure you have a blank DVD/CD media inserted and that your target device is set to the correct drive. Then click on the Burn disc button. CDBurnerXP will now start to burn the ISO image to the inserted media.

This tutorial focuses on using GParted, or Gnome Partition Editor, a free and open source partition editor. To use GParted, you must first download the CD Image file (.iso file) of GParted Live for this program. Instructions on where to find and how to burn the GParted ISO file are covered in the Preparation step. In this tutorial we will be using Microsoft Windows XP for certain steps. If you use ...

Select the formats for your mix file and choose the desired attributes for each. Attribute options will vary by format, but common options include sample rate and resolution. The MP3 and OGG Vorbis formats also offer an option to export at a Constant or Variable bit rate. The encoder will vary the bit rate during export, allocating more bits to complex passages and fewer bits to simple ones. This flexibility allows generating higher quality output files compared to the Constant bit rate mode at the same overall bit rate.

The purpose of this tutorial is to show you how to burn game images to CD/DVD. This tutorial will break it down to image format rather than console specific. Why? Because burning a BIN/CUE (for example) is exactly the same whether it be for a Saturn, Sega CD, or NeoGeo CD game.

If you extract multiple loose files into a directory with other files, this could create a problem especially if you have an ISO + mp3 image. You really want to make sure that all the parts of your image are in the same folder and that nothing else is in that folder.

If CUE files are associated with ImgBurn (mentioned above) then all you have to do is double click a CUE file and it will automatically load ImgBurn in Write mode with the CUE already selected, but you can also do this manually by launching ImgBurn and choosing Write image file to disc.

If your ISO + mp3 image has a CUE file, you can actually use ImgBurn to burn the game to a disc right now. Normally, as you might have heard, you would have to convert the mp3s to wav before you burn, but ImgBurn will do this for you automatically. Nice, right? Just double-click the CUE file to launch ImgBurn (or open ImgBurn, go to Write mode and browse to select the CUE). Select your burner and 8x as the write speed and click Write (exactly how it was done above for the BIN/CUE) to start burning the image.

This disc image format is the Clone CD image. If you plan on burning a lot of PS1 games of this format, or if you want to back up your original PS1 games, you might consider buying a copy of Cone CD. You can purchase and download it from, or you can download a 21 day trial version.

Great guide! There is always some things i need to check when burning games and it always results in me researching the net, witch takes a bit of time. Great to have all the answers in one place. thanks!

My question is : when i choose the option write from file to disc (in IMGBURN), should i choose the first or the second BIN file ? the first one usually has like 1mb and the second one its larger (multissesion?!). If i choose to write the first one, the program writes the two BIN files?

Caution: This document is provided as a guide only. If problems with any disc burning software, assistance should be requested with the software provider. These are not supported by IBM.

Note: ImgBurn is a freeware tool, copyright of Lightning UK To burn Discs using ImgBurn, do the following: 1.Click on Write image file to disc 2.Select the Browse for a file icon under the Source heading. 3.Select your .bin or .iso file 4.Select the burn icon at the bottom

Note: Nero is a trademark of Nero AG. To burn CDs using Nero, do the following: 1.Select File. 2.Select Burn Image. 3.To browse to the .iso file, select ALL Files at the bottom of the window. Continue with the burn image process. 350c69d7ab


Welcome to the group! You can connect with other members, ge...

bottom of page